Replacement seals for discontinued parts
OEM Custom Molded Seal Replacement
Our technical team can reverse engineer rubber seals to help you with legacy equipment. Inside diameters [ID] from .5 inch to 200+ inches. Cross sections from .070 inch to 1.5 inches.
Obsolete Seal Replacement for
Glazing, Automotive, Plumbing, Energy, Semi-Con, Industrial, Electronics, Aerospace and Water Treatment Industries
Precision Spliced Vulcanized O-Rings
We can fabricate to any specified Inner Dimension (ID), Cut Length (CL), or Custom Shape. We specialize in 45 and 90 degree angle splices, then permanently vulcanize to provide an extremely strong and uniform bond.
Molded Rubber Components
Custom molded products can be formed from all compounds, all shapes, and all sizes and include Seals, Diaphragms, Boots, Bellows, Check Valves, Pads, X-Rings, U-Cups, T-Seals, Lathe Cut/ Square Rings, Rubber-to-Metal & Rubber-to-Plastic bonded.
Fabricated Items & Assemblies
Do you need a component die-cut? Manufacturing capabilities include tight tolerance skiving to thickness of closed and open cell materials; slitting to width of cellular and solid rubber; lamination of acrylic, rubber, and silicone based pressure sensitive adhesives.
Molded Plastic Components
Materials include: Silicone (VMQ); Fluorosilicone (FVMQ); Fluorocarbon (FKM); Perfluoroelastomer (FFKM); Ethylene Propylene (EPDM); Neoprene (CR); Nitrile (NBR); Polyurethane (EU).
Extrusions
Materials include: Silicone (VMQ); Fluorosilicone (FVMQ); Fluorocarbon (FKM); Perfluoroelastomer (FFKM); Ethylene Propylene (EPDM); Neoprene (CR); Nitrile (NBR); Polyurethane (EU).
Cord Stock
O-Ring Cord Stock is available in all Imperial (inch) and Metric sizes and can be ordered in several different compounds.
Materials include: Silicone (VMQ); Fluorosilicone (FVMQ); Fluorocarbon (FKM); Perfluoroelastomer (FFKM); Ethylene Propylene (EPDM); Neoprene (CR); Nitrile (NBR); Polyurethane (EU).
We can manufacture a part to replace your discontinued seals
Rubber seals for legacy equipment? You’ve found the source for replacement seals. Tell us as much as you can about the O-rings or other part(s) in the form below. Even if you need a small quantity of obsolete seals. Our experience is in all types of rubber, plastic, polymers and more.
Obsolete or hard-to-find seals for legacy equipment
Your source for replacement seals, parts or components. Extrusions can be in any shape. Cross sections from .070″ to 1.5″. IDs up to 18 feet and more. Describe the part(s) in the contact form below. We manufacture quality custom molded seals and have a fast turnaround.